In what format are incoming calls signaled?
To set up the routing settings correctly in your PBX, you need to know the format in which incoming calls are signaled.
Your phone numbers are assigned to a connection in my.easybell. You can customize the number signaling format for each connection. This setting applies to all phone numbers on that connection. By default, the E.164 format is enabled.
The routing settings of your phone system must match this selected format. If you change the format later, you’ll also need to adjust the routing rules of your phone system.
Which format should I use?
| Format | Example | Routing per phone number | Recommended for |
| E.164 (Standard) | 413012345 | yes | most phone systems |
| E.164 with “+” | +413012345 | yes | 3CX |
| Username | C1234567T1 | no | Connections with only one phone number, FRITZ!Box, Gigaset phones |
Our Recommendation
If possible, use E.164 or E.164 with a “+”.
Both formats allow for routing based on the phone number. We recommend using the username only for connections to a single phone number or for specific devices such as FRITZ!Boxes and Gigaset phones.
The Formats in Detail
E.164 (Standard)
The phone number is signaled with the country code and without leading zeros, for example, 413012345.
This format is enabled by default and is suitable for most phone systems.
Advantages
- Routing by phone number is possible
- Supported by most telephone systems
- Suitable for lines with multiple phone numbers
The information about the called phone number is retrieved from the SIP Invite and transmitted in the TO header.
E.164 format with a leading “+”
The phone number is formatted in E.164 format with a leading plus sign, for example, +413012345.
This format is required by 3CX, among others, and is the default configuration there.
Advantages
- Routing can be configured on a per-phone-number basis
- Particularly suitable for 3CX
- Suitable for lines with multiple phone numbers
As with the standard E.164 format, the information about the called phone number is taken from the SIP Invite.
Username
Instead of the dialed phone number, the username stored for the connection is signaled—for example, C1234567T1.
This format is particularly suitable for connections with only one phone number, as well as for certain devices such as FRITZ!Boxes or Gigaset phones.
Limitations
- Routing per phone number is not possible
- If there are multiple phone numbers, the same value is always signaled
- Generally unsuitable for systems with extensive routing rules
The information is taken from the Contact header, which is transmitted when the phone system or device is registered.
Potential Issues When Using the Username
A connection has only one Contact header. Therefore, the same value is signaled for all phone numbers associated with the connection. If multiple phone numbers are assigned to the connection, your phone system cannot determine which number was called.
In that case, separate routing per phone number is not possible.
Here is an overview of how each dialed phone number is displayed in the respective formats.
| Called | E.164 | E.164 with "+" | Username |
|---|---|---|---|
| 03012345678 (main number) | 413012345678 | +413012345678 | C1234567T1 |
| 030123456780 (Extension) | 4130123456780 | +4130123456780 | C1234567T1 |
| 0301234567899 (Extension) | 41301234567899 | +41301234567899 | C1234567T1 |
| 03011111111 (Single Number) | 413011111111 | +413011111111 | C1234567T1 |
Attention!
If you change the format for a connection that is already set up in a phone system, you must also adjust the routing rules for incoming calls in your phone system (for example, DID or inbound rules). Otherwise, incoming calls will no longer be routed correctly.
